Advantech ICR-1601 - Page 239

ICR-1601
239
Managing Event Configuration
Item
Value setting
Description
Event
SMS (or SNMP Trap) by
default
Specify the Event type (SMS, SNMP Trap) and an event identifier / profile.
SMS: Select SMS and fill the message in the textbox to as the trigger
condition for the event;
SNMP: Select SNMP Trap and fill the message in the textbox to specify SNMP
Trap Event;
Note: The available Event Type could be different for the purchased product.
Trigger Type
Period (or Once) by
default
Specify the Trigger Type (Period, Once).
Period: Event will be executed in a period set by Interval below.
Once: Event will be executed just once.
Interval
Number in seconds
Time interval for event execution in period.
Interval: 0 ~ 86400
Note: Available for Trigger Type set to Period only.
Description
String format: any text.
Enter a brief description for the Managing Event.
Action
All box is unchecked by
default.
Specify Network Status, or at least one rest action to take when the expected
event is triggered.
Network Status: Select Network Status Checkbox to get the network status as
the action for the event;
WAN: Select WAN checkbox and the interested sub-items
(Connect/Disconnect, Auto/LTE/3G/2G), the router will change the settings as
the action for the event;
LAN&VLAN: Select LAN&VLAN Checkbox and the interested sub-items (Port
link On/Off), the router will change the settings as the action for the event;
WiFi: Select WiFi Checkbox and the interested sub-items (WiFi radio On/Off),
the router will change the settings as the action for the event;
NAT: Select NAT Checkbox and the interested sub-items (Virtual Server Rule
On/Off, DMZ On/Off), the router will change the settings as the action for the
event;
Firewall: Select Firewall Checkbox and the interested sub-items (Remote
Administrator Host ID On/Off), the router will change the settings as the
action for the event;
VPN: Select VPN Checkbox and the interested sub-items (IPSec Tunnel
ON/Off, PPTP Client On/Off, L2TP Client On/Off, OpenVPN Client On/Off), the
router will change the settings as the action for the event;
GRE: Select GRE Checkbox and the interested sub-items (GRE Tunnel On/Off),
the router will change the settings as the action for the event;
System Manage: Select System Manage Checkbox and the interested sub-
items (WAN SSH Service On/Off, TR-069 On/Off), the router will change the
settings as the action for the event;
Administration: Select Administration Checkbox and the interested sub-
items (Backup Config, Restore Config, Reboot, Save Current Setting as
Default), the router will change the settings as the action for the event;
Remote Host: Select Remote Host checkbox and one of defined remote
hosts.
Note: The available Event Type could be different for the purchased product.
Managing
Event
The box is unchecked by
default.
Click Enable box to activate this Managing Event setting.
Save
NA
Click the Save button to save the configuration
Undo
NA
Click the Undo button to restore what you just configured back to the
previous setting.