Advantech ICR-1601 - Page 241

ICR-1601
241
Notifying Event Configuration
Item
Value setting
Description
Event
WAN is selected by
default
Specify the Event type and corresponding event configuration. The
supported Event Type could be:
WAN: Select WAN and a trigger condition to specify a certain WAN Event;
LAN&VLAN: Select LAN&VLAN and a trigger condition to specify a certain
LAN&VLAN Event;
WiFi: Select WiFi and a trigger condition to specify a certain WiFi Event;
DDNS: Select DDNS and a trigger condition to specify a certain DDNS Event;
Administration: Select Administration and a trigger condition to specify a
certain Administration Event;
Data Usage: Select Data Usage, the SIM Card (Cellular Service) and a trigger
condition to specify a certain Data Usage Event;
Note: The available Event Type could be different for the purchased product.
Trigger Type
Period (or Once) by
default
Specify the Trigger Type (Period, Once).
Period: Event will be executed in a period set by Interval below.
Once: Event will be executed just once.
Interval
Number in seconds
Time interval for event execution in period.
Interval: 0 ~ 86400
Note: Available for Trigger Type set to Period only.
Description
String format : any text.
Enter a brief description for the Notifying Event.
Action
All box is unchecked by
default.
Specify at least one action to take when the expected event is triggered.
SMS: Select SMS, and the router will send out a SMS to all the defined SMS
accounts as the action for the event;