Advantech ICR-3211 Start Guide

Start Guide
Disconnect the router from the power supply before handling the SIM card.
3. Power
The router requires an external DC power supply. The DC voltage required is between
+9 and +36 V DC. The router has built-in protection against reverse polarity without signaling.
Connect the power supply cable to the PWR connector on the router’s front panel; see the
figure below.
QSG-0006-EN, February 28, 2022 4 Released in the Czech Republic

Advantech ICR-3211 Specifications

General

Brand	Advantech
Model	ICR-3211
Category	Network Router
Language	English