4.1 Introduction
To
make the hardware easier
to
access
for programmers, Advantech has
developed an demo program in order to let customer test the functions on
TREK-520. This document describes detailed information for each Advantech
demo program so that
application developers can become
more
familiar with
using them.
For technical support, contact Advantech application engineers
worldwide. For news updates, visit our website:
www.advantech.com
4.1.1
Execute J1939 demo program
This
section explains
how to install the
Advantech demo program in Windows
XP Pro / Embedded.
1. Execute the test program called “IMC_Demo”
Figure 4. 1
2. Click J1939: customer may connect directly to the truck; we use a
simulator board below to explain how J1939 protocol can be executed.
First, connect to the simulator board to TREK-520 CAN port and console
PC, once the simulator is powered on (connect to the truck), you can start
getting the data, just click [Read], you may get the data you need from the
simulator, click [Read], you may transfer the data to Console
Smulator vendor name:
23
www.advantech.com
To Next Page
Loading...