Advantech TREK-520 - Page 25

4.1.2 CAN Test
1. CAN: Console PC, install [PCAN_USB-to-CAN] test program, and use
USB to CAN fixture to connect to TREK-520 CAN port.
2. Execute PCAN-View USB→ Set Baud rate 250kBit/s→ Select
[Extended]→OK→ Transmit → New → ID(Hex) key in number → Data key
in any number→[Period] key in 100ms→Click [Extended Frame]→OK.
See below figure 4.
Figure 6. 11
Figure 4. 12
TREK-520 User Manual 22
25
www.advantech.com