below.
STEP 10: Click the Ralink’s icon will bring up RaUI main window. User can find the
surrounding APs in the list. The current connected AP will also shown with the green icon
indicated as below screen. User may user the available tab to configure more advanced
features provided by Ralink’s wireless NIC.
3.1.1 Start
When starting RaUI, system will connect to the AP with best signal strength without setting
profile or matching profile setting. It will issue a scan command to wireless NIC. After two
seconds, the AP list will updated with the result of BSS list scan. The AP list include most
To Next Page
Loading...
Need help?
General
