3.2 For Windows Vista
Ralink wireless utility is shown as below. There are 6 settings pages in Ralink wireless
utility:
Profile Page: Manage the profile.
Link Status Page: Display current connection information.
Site Survey Page: Display the available networks.
Statistics Page: Display the packet counters
WPS Configuration Page: Connect to WPS (Wi-Fi Protected Setup) capable APs.
QoS Page: It involves “WMM Enable”, “WMM – Power Save Enable” and DLS setup
About Page: Display Ralink driver and utility information.
3.2.1 Profile
In the “Profile”, you can view and manage the current using Available Point(s). You can
Add, Delete, Edit, or Activate the current Available Point(s). Also you can duplicate the AP
or set current AP as Default.
To Next Page
Loading...
