Disconnect from WPS AP: Clicking the “Disconnect” button will stop the WPS
connection.
Delete WPS profile: Clicking the “Delete” button will delete the selected WPS profile.
3.2.6 QoS
The QoS Page of RaConfig. It involves “WMM Enable”, “WMM – Power Save Enable” and
“DLS setup Enable”.
Configure to enable Wi-Fi Multi-Media
If you want to use “WMM – Power Save” or “Direct Link”, you must enable WMM. The
setting method of enabling WMM indicates as follows:
Step 1: Click “WMM Enable”
Step 2: Click “Apply”.
To Next Page
Loading...
