1. Install the Device
STEP 1: Turn off your computer and remove its cover
STEP 2: Insert the PCI card to an available PCI slot firmly.
STEP 3: Secure this card to the rear of the computer chassis and put back the cover.
STEP 4: Secure the antenna to antenna connector of the card.
STEP 5: Turn on the computer.
2. Install Driver & Utility
STEP 1: Insert Wireless 54Mbps PCI Adapter Installation CD into CD-ROM drive then windows below
will appear. Click Install Driver & Utility to begin device driver installation.
STEP 2: Select the language for this installation from the choices and click OK to continue.
STEP 3: The InstallShield Wizard for Realtek Wireless Network Utility will display, click Next> to
continue.
STEP 4: Select the country domain is authorized to use click Next> to continue.
To Next Page
Loading...
