• If you decide to use IP address from Wireless Router, select “Obtain an IP
address automatically”.
• If you decide to use the IP address you are desired, select “Use the
following IP address”. Make sure enter correct addresses in “IP Address”
and “Subnet Mask” fields.
• You must set Wireless Router’s IP address as “Default Gateway”.
• If the DNS Server fields are empty, select “Use the following DNS server
addresses” and enter the DNS address is provided by your ISP, then click
“OK”.
Checking TCP/IP Settings for Windows XP
a) Click “Start”, select “Control Panel
Network Connection” and right click “Local
Area Connection” then select “Properties”. The window shown as below will
appear.
b) Select “Internet Protocol (TCP/IP)” then click “Properties”, window shown as
below will appear.
To Next Page
Loading...
Need help?
General