Advent AW770 - Power the Headphones; Insert the Batteries; Charging Ni-Cd Batteries

/Ii.,: On most bookshelf-type or compact stereo systems, inserting a headphone plug
into the headphone jack results in automatic cutoff of the stereo system speakers.
lIi.t: Most TVs, regardless of age or price, have variable outputs. If you are unsure
which, if any of your outputs is fixed, refer to the TV instruction manual. Some
TVs have outputs that can switch between variable and fixed. Refer to the TV
instruction manual. When given a choice, fixed is always recommended.
PlWER THE HEADPHONES
The AW770 headphones are powered by 3 AAA alkaline batteries.
INSERT THE BAnERIES
1. Make sure the headphone Power ON/OFF
Button (0) is "OFF" or in the "out" position.
2. Remove Battery Compartment Cover (B) by
pushing up and out at the same time on the
notch at the bottom of the cover.
3. Insert batteries following polarity as diagrammed
inside battery compartment
USING OPTIONAL NICKEL CADMIUM (Ni-Cd) BAnERIES
1. Make sure headphone Power ON/OFF Button (0) is "OFF". Connect one end of
Charge Cable (P) to Charge Input Jack (E) on the headphone.
2. Connect the other end of Charge Cable (P) to Charge Output Jack (K) on back of
transmitter.
6