616000001-0 Rev. 291012-1
19-20
Il presente documento non può essere riprodotto né portato a conoscenza di terzi senza autorizzazione della ditta A.E.B. S.p.A.
This document may not be reproduced or made known to any third party without permission of the company AEB S.p.A.
616000001-0 Rev. 291012-1
20-20
Il presente documento non può essere riprodotto né portato a conoscenza di terzi senza autorizzazione della ditta A.E.B. S.p.A.
This document may not be reproduced or made known to any third party without permission of the company AEB S.p.A.
Read the following general conditions carefully.
The user shall be deemed to be fully acquainted with the following conditions and to have
accepted them at the time of the software usage.
Scope of the agreement
A.E.B. S.p.A. retains ownership of the software (herein referred to as “PROGRAM”) required to use
the A.E.B. product you have purchased.
A.E.B. S.p.A. does not assign any rights to the PROGRAM through the sale of this product, but solely
the right of use as the end user of the said product, in accordance with the modalities described in
these general conditions and subject to further conditions and cautions given in the user manual.
A.E.B. S.p.A. is the sole holder of all copyright and other rights of the PROGRAM, the moral rights
and the rights of economic use, including the right of reproduction, translation, adaptation, transfor-
mation, modication and distribution, in any form and with no restrictions whatsoever, including the
sale and the lease of its copies and of modied or updated versions.
A.E.B. S.p.A. is also the holder of the intellectual property rights to all the object codes and to all
the source codes for the PROGRAM.
All the techniques, algorithms and procedures contained in the PROGRAM and in the associated do-
cumentation are considered condential and property of A.E.B. S.p.A.
The Licensee may not dispose in any way of the object codes or source codes, or include them as
part of a licence, or allow them to be processed, pledged or otherwise transferred, or in any way to
make the PROGRAM available to third parties whether for sale or for free.
The Licensee shall not hire or lease the PROGRAM or any part of it.
Use of the PROGRAM
The Licensee may not reproduce, translate, adapt, transform, modify the PROGRAM or any part of
its contents, nor may it engage third parties to perform the said activities.
The Licensee may not copy, even in part, the manuals relating to the PROGRAM and any additional
material (logical diagrams or ow charts, etc.) and may not consent to their use by third parties.
The Licensee may not decodify, decompile, disassemble, modify or translate the PROGRAM, except
as expressly provided under mandatory statutory regulations.
This user licence is granted for the PROGRAM as a single product.
Its individual component parts may not be divided for use in separate processing environments or
by parties other than the Licensee.
Under no circumstances shall A.E.B. S.p.A. be liable for direct and indirect damage (including da-
mage through loss of earnings or savings, or interruptions to activities, loss of information or data)
deriving from the incorrect installation of the software or from any use that does not comply with
the indications given in the user manual.
Any interruption to the licence or the cancellation of this agreement, for whatever reason this oc-
curs, shall not detract from the prohibition to use, duplicate or tamper with the PROGRAM; the
Licensee will also undertake to observe the obligation of condentiality for 5 years after the date
when this agreement expires.
Trademark
All trademarks, whether registered or not, and all distinctive signs or names used to mark the PRO-
GRAM and the associated documentation shall remain the property of A.E.B. S.p.A. and the Licensee
shall derive no rights to the latter by entering into this agreement.
Third parties and the Licensee’s collaborators and employees
The Licensee undertakes to ensure that all persons (employees, collaborators, clients, suppliers,
agents) with access to the PROGRAM are bound to observe all the obligations assumed herein by
the Licensee.
It is hereby understood that the Licensee will be liable for any breach attributable to those indivi-
duals who have been given access to the PROGRAM.
Court with jurisdiction
The court with jurisdiction to settle any disputes concerning the construal and application of this
agreement will be the Court of Reggio Emilia.
Applicable law
This contract will be governed by Italian law.
In the event of any aspect not expressly provided for herein, reference will be made to the provi-
sions of the Italian Civil Code.
The nullity of one or more conditions of this user license will not, in principle, determine the nullity
of the entire agreement.
USER LICENCE AGREEMENTCHANGEOVER SWITCH OPERATION
Operating description
The changeover switch supplied with the kit has one button, 7 LEDs and an internal buzzer.
BUTTON
This is used to select either the petrol or the gas fuel supply. Press the button one time to switch to
gas and press it again to return to petrol.
GREEN LED FUNCTIONS
Rapid ashing – the control unit is prepared to start with petrol and switch automatically to GAS.
Steady on with yellow LED off – Gas operation.
RED LED + 4 GREEN LED FUNCTIONS
Fuel level indicator; reserve RED LED, while the 4 GREEN LEDS indicate the fuel level (1/4, 2/4,
3/4, 4/4). The indicator is illuminated only when the gas mode is selected.
YELLOW LED FUNCTIONS
Steady on with Green LED off – PETROL operation.
Steady on with ashing Green LED – the control unit is prepared to start with petrol and
switch automatically to Gas.
LOW GAS PRESSURE PETROL CHANGEOVER
When the changeover switch indicates the fuel tank is in reserve and the gas pressure drops below a
set value, the control unit automatically switches over to gas. This prevents the engine from running
with an excessively lean carburetion, thus damaging the catalyser. Before returning to gas opera-
tion, ll up. The changeover switch signals the changeover to petrol due to low gas pressure by
activating the internal buzzer, illuminating the YELLOW petrol operation LED and by illuminating the
RED LED in an alternating pattern with the 4 GREEN LEDS. To make the changeover switch return to
normal operation press the BUTTON one time; the YELLOW LED will remain on to indicate that the
car is operating with petrol and the buzzer turns off.
4 GREEN
LEDS - FUEL
LEVEL
YELLOW LED -
PETROL
OPERATION
RED LED –
EMPTY TANK
RESERVE
BUTTON
GREEN LED -
GAS OPERATION
WITH
DIAGNOSTIC
SIGNAL
To Previous Page
Loading...
Need help?
General
