20
20
1
2
3
1. Pull the mulch plug handle to its maximum
length.
2. Insert the mulch plug assembly into the rear
discharge chute, ensuring that the metal frame
is properly aligned with its slot.
3. Push down on the mulch plug handle until the
metal frame is fully inserted into its slot.
NOTE: The mower does not start unless
the mulch plug is properly installed. The
grass catcher/mulch plug frame slot has 2
microswitches that activate and allow the
mower to start when the grass catcher or
mulch plug is installled.
INSTALLING AND REMOVING THE MULCH
PLUG
To Next Page
