AEG BMG 4906 - Maintenance and Care; Cleaning and Upkeep; Storage Instructions; Proper Storage of Device and Cuff

81
GB
(2)In order to delete all data keep pressed
simultaneously the button MODE and the
button – for approx. 3 seconds. The indica-
tion „cL“, (fig. F), and afterwards the fig. G
appear on the display.
(3)To verify whether the data has been deleted
push the – or + buttons after a measuring
cycle. If the display does not show any data
the memory has been cleared.
Maintenance
• To clean the housing of the device use a
cloth moistened with water or a soft cleaning
agent, then rub dry with a dry cloth. Use a
dry cloth to clean the cuff if it should be dirty.
• Do not immerse the device in water.
• Do not use gas or strong cleaning agents.
• If the measuring device is not used for a longer time, the batteries should
be removed. (Leaking batteries may damage the device).
Storing in the box
• Always store the cuff in the provided box after use.
• Protect the measuring device with its accessories from direct sunlight,
high temperatures, humidity and dust.
• Do not expose the device to extremely low (below –20 °C (-4.0 °F)) or
high (above 55°C (122.0 °F)) temperatures.
AEG_BMG_4906_BedAnl_80x80_3.qxd 19.02.2008 17:35 Uhr