AEG BSB18C2 - Technical Specifications; Tool Data; Battery and Charger Information; Compatibility Details

16
16
BATTERY AND CHARGER
Compatible battery pack
(not included)
Compatible charger
(not included)
L1815R
L1820R
L1825R
L1830R-X5
L1840R
L1850R
L1860R
L1860R-X5
L1890R
AL18G
AL1218G
BL1218
BLK1218
BL18DP-X5
BL18DP2-X5
Use AEG 18V battery and charger only
WARNING! Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
DRILL SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces, when performing an
operation where the cutting accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
SCREWDRIVER SAFETY WARNINGS
Hold power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring. Fasteners
contacting a “live” wire may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
TECHNICAL DATA CORDLESS PERCUSSION DRILL/DRIVER
BSB18C2
Rated voltage 18 V
Drilling capacity in steel 13 mm
Drilling capacity in wood 40 mm
Drilling capacity in brick and tile 13 mm
Wood screws 6 mm
No-load speed
1st gear 0 - 450 min
-1
2nd gear 0 - 1800 min
-1
Impact rate
1st gear 0 - 5850 min
-1
2nd gear 0 - 23400 min
-1
Torque with battery (1.5 Ah / 2.0 Ah) * 50 Nm
Torque with battery (3.0 Ah) * 60 Nm
Torque with battery (4.0 Ah) * 70 Nm
Weight - not including battery pack 1.24 kg
Measured values determined according to EN 62841.
A-weighted sound pressure level L
p
= 87 dB(A)
Uncertainty K 3 dB(A)
A-weighted sound power level L
W
= 98 dB(A)
Uncertainty K 3 dB(A)
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 62841.:
Impact drilling into concrete a
h,ID
= 15.6 m/s
2
Uncertainty K 1.5 m/s
2
Drilling into metal a
h,D
= < 2.5 m/s
2
Uncertainty K 1.5 m/s
2
Screwing a
h
= < 2.5 m/s
2
Uncertainty K 1.5 m/s
2
* test to AEG standard N 877318
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool.
However if the tool is used for dierent applications, with dierent accessories or poorly maintained, the vibration emission may dier. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running but not actually doing
the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eects of vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.