AEG CIB6742MCB User Manual

2. Pull the rear end of the shelf support
away from the side wall and remove
it.
2
1
The retaining pins on the
telescopic runners must
point to the front.
Install the shelf supports in the opposite
sequence.
CAUTION!
Make sure that the longer
fixing wire is in the front. The
ends of the two wires must
point to the rear. Incorrect
installation can cause
damage to the enamel.
12.5 Removing and cleaning
the door glasses - top oven
The door glass in your
product can be different in
type and shape from the
examples you see in the
image. The number of
glasses can also be
different.
1. Open the door.
2. Hold the door trim on the top edge of
the door at the two sides and push
inwards to release the clip seal.
1
2
1
3. Pull the door trim to the front to
remove it.
4. Remove the glass panels.
To install the panels, do the same steps
in reverse.
12.6 Removing and cleaning
the door glasses - main oven
The door glass in your
product can be different in
type and shape from the
example you see in the
image. The number of
glasses can also be
different.
1. Push the door trim at one side to
remove it.
1
2
A
2. Pull up the trim.
3. Remove the glass panels.
www.aeg.com36

AEG CIB6742MCB Specifications

General

Brand	AEG
Model	CIB6742MCB
Category	Cookers
Language	English