44
Cleaning with Pyroluxe
1
Warning! The oven becomes very hot during pyroluxe self-cleaning.
Keep young children well away from the oven.
1
Important: Before carrying out pyroluxe cleaning the oven must be
completely emptied with the exception of the shelf support rails. Also
remove the fat filter!
3
If you are using the oven shelf runners obtainable as a special acces-
sory, they must be removed before cleaning with pyroluxe.
It would not be possible to start the pyroluxe cleaning process because
of a safety switch that protects the oven shelf runners.
0 1. Select the pyroluxe oven function.
2. Turn the temperature selection
switch clockwise as far as it will go.
Pyroluxe cleaning will begin after a
few seconds and will switch itself
off again automatically after 2
hours 30 minutes.
3. When pyroluxe cleaning has been
completed, turn all switches to the zero position.
4. After it has cooled down, wipe out the oven with a damp cloth.
3
During pyroluxe cleaning, the door is locked and the oven lighting is
off. The temperature pilot light will come on until the door lock is re-
leased.
To Next Page
Loading...
