19
4. Push the point of the turnspit into
the drive mechanism on the left of
the oven back wall, until it engages.
5. Fit the groove at the front of the
handle onto the notch provided in
the turnspit support bracket.
6.
7. Take the handle off.
8. Set oven function and temperature
as indicated in the turnspit Table.
3 Check that the turnspit is turning.
Taking the turnspit out
1
Caution! After roasting, the turnspit will be very hot and may cause
burns!
1. Set the oven function and temperature selection to zero.
2. Attach the handle to the turnspit.
3. Press the clamp down.
3 The clamp must be kept pressed, to fix the handle securely to the turn-
spit.
4. Take out the turnspit with the roast.
To Next Page
Loading...
