AEG COMPETENCE B8100-1 - Using the Countdown Timer; Setting and Managing Countdown

27
COUNTDOWN
1. Press clock function selection but-
ton Y repeatedly until COUNT-
DOWN is flashing.
2. Using buttons + or - set the re-
quired countdown.
(Max. 2 hours and 30 minutes.)
After approx. 5 seconds the display
will show the remaining time.
COUNTDOWN is illuminated.
When the time has expired COUNT-
DOWN flashes and an acoustic sig-
nal will sound for 2 minutes.
To switch the acoustic signal off:
press any clock functions button.