19
Inserting the combination shelf, baking tray and general
purpose tray
Inserting the baking tray and
general purpose tray:
The trays have a little bulge on the
left and right edges. These act as an
anti-tip device and must always be
located towards the rear when in-
serting the tray.
Inserting/Removing the Fat Filter
The fat filter protects the rear wall
heating element against splashes of
fat when roasting.
Inserting oven shelves:
Insert the shelf at the desired
position.
Inserting the fat filter
Holding the fat filter by the tab,
insert the two retainers into the
opening on the rear wall of the
oven (fan opening) from the top
downwards.
Removing the fat filter
Take hold of the tab on the fat
filter and remove by pulling up-
wards.
To Next Page
Loading...
