EasyManua.ls Logo

AEG FD395V - Sensor, Pump, and Temperature Malfunctions

AEG FD395V
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Problem and alarm code Possible cause and solution
The appliance does not drain the wa‐
ter.
The indicator flashes 2 times
intermittently.
Acoustic signal sounds 2 times in‐
termittently.
Make sure that the sink spigot is not clogged.
Make sure that the interior filter system is not
clogged.
Make sure that the drain hose has no kinks or
bends.
The anti-flood device is on.
The indicator flashes 3 times
intermittently.
Acoustic signal sounds 3 times in‐
termittently.
Close the water tap.
Make sure that the appliance is correctly in‐
stalled.
Make sure the baskets are loaded as instruc‐
ted in the user manual.
Malfunction of the water level detec‐
tion sensor.
The indicator flashes 4 times
intermittently.
Acoustic signal sounds 4 times in‐
termittently.
Make sure that the filters are clean.
Switch the appliance off and on.
Malfunction of the wash pump or the
drain pump.
The indicator flashes 5 times
intermittently.
Acoustic signal sounds 5 times in‐
termittently.
Switch the appliance off and on.
The temperature of the water inside
the appliance is too high or malfunc‐
tion of the temperature sensor occur‐
red.
The indicator flashes 6 times
intermittently.
Acoustic signal sounds 6 times in‐
termittently.
Make sure that the temperature of the inlet wa‐
ter does not exceed 60°C.
Switch the appliance off and on.
Technical malfunction of the appli‐
ance.
The indicator flashes 12 times
intermittently.
Acoustic signal sounds 12 times in‐
termittently.
Switch the appliance off and on.
www.aeg.com44

Related product manuals