EasyManua.ls Logo

AEG FSK63657P - Unsatisfactory Washing & Drying Results; Poor Washing Performance; Poor Drying Performance; Whitish;Bluish Streaks on Dishes

AEG FSK63657P
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The appliance returns to the programme
selection.
11.2 The washing and drying results are not satisfactory
Problem Possible cause and solution
Poor washing results. Refer to "Daily use", "Hints and tips" and the basket
loading leaflet.
Use more intensive washing programme.
Activate the ExtraPower option to improve the washing
results of a selected programme.
Clean spray arm jets and filter. Refer to "Care and
Cleaning".
Poor drying results. Tableware was left for too long inside the closed appli‐
ance. Activate AirDry to set the automatic opening of
the door and to improve the drying performance.
There is no rinse aid or the dosage of rinse aid is not
sufficient. Fill the rinse aid dispenser or set the level of
rinse aid to a higher level.
The quality of the rinse aid can be the cause.
We recommend to use rinse aid always, even in com‐
bination with multi-tablets.
Plastic items may need to be towel dried.
The programme does not have the drying phase. Re‐
fer to "Programmes overview".
There are whitish streaks or
bluish layers on glasses and
dishes.
The released quantity of rinse aid is too high. Adjust
the rinse aid level to a lower level.
The quantity of detergent is too high.
There are stains and dry water
drops on glasses and dishes.
The released quantity of rinse aid is not sufficient. Ad‐
just the rinse aid level to a higher level.
The quality of the rinse aid can be the cause.
The interior of the appliance is
wet.
This is not a defect of the appliance. Humid air con‐
densates on the appliance walls.
Unusual foam during washing. Use the detergent designed specifically for dishwash‐
ers.
Use a detergent from a different manufacturer.
Do not pre-rinse dishes under running water before
putting them in the appliance.
Traces of rust on cutlery. There is too much salt in the water used for washing.
Refer to "The water softener".
Silver and stainless steel cutlery were placed together.
Do not put silver and stainless steel items close to‐
gether.
www.aeg.com26

Related product manuals