Programme Degree of soil
Type of load
Programme phases Options
7)
• No load • Self-cleaning
1)
This programme offers the most efficient use of water and energy consumption for crockery and cut-
lery with normal soil. This is the standard programme for test institutes.
2)
The appliance senses the degree of soil and the quantity of items in the baskets. It automatically ad-
justs the temperature and quantity of water, energy consumption and programme duration.
3)
This programme is designed to wash heavily soiled items with high water pressure and at a high tem-
perature.
4)
This programme is suitable for washing a load with normal soil.
5)
This programme is suitable for washing a load or a half load with fresh or light soil in a short time.
6)
With this programme, you can quickly rinse off food remains from dishes and prevent odours forming
in the appliance. Do not use detergent with this programme.
7)
This programme is designed to clean the inside of the appliance effectively and efficiently. It removes
limescale and grease buildup. The programme should be run at least once every 2 months with a desca-
ler or a cleaning product designed for dishwashers and without any load.
5.1 Consumption values
Programme
1)
Water
(l)
Energy
(kWh)
Duration
(min)
10.5 0.921 235
8 - 15 0.7 - 1.7 46 - 170
12.5 - 14.5 1.4 - 1.7 170 - 190
12.9 1.14 89
10 0.9 30
4 0.1 14
10 0.86 60 - 70
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
info.test@dishwasher-production.com
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
ENGLISH 9
To Next Page
Loading...
Need help?
General
