EasyManuals Logo
Home>AEG>Washer>L6FBK841P

AEG L6FBK841P User Manual

AEG L6FBK841P
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
1. Touch the Inicio/Pausa button.
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the Inicio/
Pausa button.
The programme or the delay start
continues.
4. The door can be opened when the
programme is complete, or set
spinning or draining programme/
option and than press Inicio/Pausa
button.
12.12 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Inicio/Pausa button
goes off.
The door unlocks and the indicator
goes off.
1. Press the On/Off button to deactivate
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last set
programme. Turn the
programme knob to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
12.13 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
The display shows the door locked
indicator
The drum still turns at regular
intervals to prevent the creases in the
laundry.
The door stays locked.
You must drain the water to open the
door:
1. If necessary, touch the Centrif. button
to decrease the spin speed proposed
by the appliance.
2. Press Inicio/Pausa to continue the
cycle
3. When the programme is completed
and the door locked indicator
goes off, you can open the door.
4. Press the On/Off button a few
seconds to deactivate the appliance.
In any case, the appliance
empties the water out
automatically after
approximately 18 hours.
12.14 Stand-by option
The Stand-by function automatically
deactivates the appliance to decrease
the energy consumption when:
You do not use the appliance for 5
minutes before you touch the Inicio/
Pausa button.
www.aeg.com24

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEG L6FBK841P and is the answer not in the manual?

AEG L6FBK841P Specifications

General IconGeneral
BrandAEG
ModelL6FBK841P
CategoryWasher
LanguageEnglish

Related product manuals