% Remaining moisture at the end of spinning phase. The higher is the spin speed,
the higher is the noise and the lower is the remaining moisture.
Values and programme duration may differ depending on different
conditions (e.g. room temperature, water temperature and pressure, load
size and type of laundry, supply voltage) and also if you change the
default setting of a programme.
16.3 According to
Commission Regulation Eu
2019/2023
Eco 40-60 pro‐
gramme
kg kWh Litres h:mm % °C
rpm
1)
Full load 9 0.760 64 3:40 53 33 1351
Half load 4,5 0.440 47 2:45 53 27 1351
Quarter load 2,5 0.300 39 2:35 54 26 1351
1)
Maximum spin speed.
Power consumption in different modes
Off (W) Stand-by (W) Delay start (W)
0.50 0.50 4.00
Time to Off/Standby mode is 15 minutes maximum.
16.4 Common programmes
These values are indicative only.
Programme
kg kWh Litres h:mm % °C
rpm
1)
Bavlna
2)
95°C
9 2.75 85 4:00 52 85 1400
Bavlna
60°C
9 1.65 80 3:30 52 55 1400
Bavlna 20°
3)
20°C
9 0.35 80 3:00 52 20 1400
Syntetika
40°C
4 0.85 75 2:30 35 40 1200
www.aeg.com36
To Next Page
Loading...
Need help?
General
