EasyManua.ls Logo

AEG L6SE26C - 11.4 Changing position of detergent divider

AEG L6SE26C
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CAUTION!
Use only specified
detergents for washing
machine.
Always obey the instructions
that you find on the
packaging of the detergent
products.
1 Detergent compartment for
prewash phase or soak pro-
gramme (if available). Add the
detergent for prewash and soak
before the start of the pro-
gramme.
2 Detergent compartment for
washing phase. If you use a liq-
uid detergent, put it immedi-
ately before you start the pro-
gramme.
Compartment for liquid addi-
tives (fabric conditioner, starch).
Put the product in the compart-
ment before you start the pro-
gramme.
After a washing cycle, if necessary,
remove any detergent residue from the
detergent dispenser.
11.4 Changing position of
detergent divider
1. Pull out the detergent dispenser. The
position A of the detergent divider is
for powder detergent (factory
setting).
2 1
MAX
A
2. To use also liquid detergent/
additive or bleach: Remove
detergent divider from the position A
and insert it in position B.
B
2 1
MAX
The position B of the detergent
divider is for powder detergent in the
rear compartment and for liquid
detergent/additive or bleach in the
front compartment.
3. To use only liquid detergent: Insert
the detergent divider in position C.
C
2 1
MAX
Do not use gelatinous or thick
liquid detergents.
Do not exceed the maximum
dose of liquid detergent.
Do not set the prewash phase.
Do not set the delay start
function.
ENGLISH
21

Related product manuals