Centrif. touch
button
When you set a programme, the appliance automatically selects
the default spin speed.
Touch this button repeatedly to:
• Change the spin speed.
The display shows only the spin speeds avail‐
able for the set programme.
• Activate the Rinse Hold option .
The water of the last rinse is not drained out to prevent the fab‐
rics from creasing. The washing programme ends with water in
the drum and the final spin phase is not performed.
The display shows the indicator
. The door stays locked.
The drum turns regularly to reduce creasing. You must drain
the water to unlock the door.
Touch Inicio/Pausa button: the appliance performs the spin‐
ning phase and drains the water.
• Activate the Extra Silent option.
All spinning phases (intermediate spin and final spin) are sup‐
pressed and the programme ends with water in the drum. This
helps to reduce creasing.
As the programme is very quiet, it is suitable for use at night
time when cheaper electricity tariffs are available. In some pro‐
grammes the rinses are performed with more water.
The display shows the indicator
. The door stays locked.
The drum turns regularly to reduce creasing. You must drain
the water to unlock the door.
Touch the Inicio/Pausa button button: the appliance performs
only the draining phase.
The appliance empties the water out automati‐
cally after approximately 18 hours.
www.aeg.com18
To Next Page
Loading...
Need help?
General
