AutoDose detergent tank.
AutoDose fabric softener tank.
The appliance is pre-set by the factory
to suit most users habits.
Once started the programme, the
appliance will automatically release the
right amount of detergent and softener
according to the real fabric load, if the
indicators
and/or are on in the
display.
In some programmes,
AutoDose is OFF (OFF is on
and the indicators and/or
are off in the display)
because there are garments
requiring special detergents
or treatments. When OFF is
on, pour the detergent and
other treatments in the
proper manual filling
compartment.
Please refer to "AutoDose
and options compatibility
with programmes" in
"Programmes" chapter.
Further explanations on
AutoDose and activation of
advanced settings are
available downloading the
APP.
9.2 Detergent dispenser with
AutoDose tanks and manual
compartments
When using detergent and
any other treatments, always
follow the instructions that
you find on the packaging of
the detergent products.
Anyway, we recommend not
to exceed the maximum
indicated level in each
compartment ( ).
If both AutoDose tanks are enabled in
the set programme, liquid detergent and
fabric softener are automatically loaded.
If one of the AutoDose tank or both
are disabled (OFF ) in the set
programme, proceed by manually filling
the product in the proper compartment.
WARNING!
Do not put powder
detergent in the AutoDose
compartment.
• AutoDose tanks for liquid
detergent and fabric softener
.
• Manual compartment for washing
phase: powder or liquid detergent.
ENGLISH 23
To Next Page
Loading...
Need help?
General
