Door Reversal Instructions
32
0 Take-out the latched catch covering J and pull-off the plug.
0 Connect the door catch H and the catch covering J on the respective
opposite side to the plug, insert into the break-out and screw-down or
latch into position.
0 Push the door with the hinges into the breakouts provided for them in
the front panel of the appliance and firmly attach it with the screws.
0 After changing-over the door, check that the DOOR button functions
correctly.
1
Warning! The appliance is safe again for operation only when all plas-
tic parts have been mounted.
To Next Page