The options are not selectable with all washing programmes. Check the
compatibility between options and washing programmes in the "AutoDose
and options compatibility with programmes" paragraph in the
"Programmes" chapter. An option can exclude another one, in this case
the appliance doesn't allow you to set the incompatible options together.
Make sure the screen and touch buttons are always clean and dry.
Programme
dial
For selecting the desired washing programme. Refer to "Pro‐
grammes" chapter for more details.
Display
It provides information about the setting programme. Refer to "Dis‐
play" paragraph for more details.
AutoDose
Liquid De‐
tergent
touch but‐
ton
For activating and deactivating the automatic detergent loading. Refer
to "The AutoDose Technology (Autodosing)" chapter for more details.
AutoDose
Fabric Soft‐
ener touch
button
For activating and deactivating the automatic detergent loading. Refer
to "The AutoDose Technology (Autodosing)" chapter for more details.
Option
touch but‐
ton
Press this button repeatedly to activate one of the two following op‐
tions:
• Skipping wash phase - Rinse Only option
The appliance performs only the rinsing phase, the spinning and
the draining phases of the selected programme.
• Spin/Drain option
The appliance performs only final spinning or only draining phase
of selected programme. By selecting No Spin option via
Spin button only Drain cycle can be configured.
The corresponding indicator above the touch button illuminates.
Start/Pause
touch but‐
ton
Touch this button to start, pause the appliance or interrupt a running
programme.
www.aeg.com14
To Next Page
Loading...
