% Remaining moisture at the end of spinning phase. The higher is the spin speed,
the higher is the noise and the lower is the remaining moisture.
Values and programme duration may differ depending on different
conditions (e.g. room temperature, water temperature and pressure, load
size and type of laundry, supply voltage) and also if you change the
default setting of a programme.
16.3 According to
Commission Regulation Eu
2019/2023
Eco 40-60 pro‐
gramme
kg kWh Litres h:mm % °C
rpm
1)
Full load 8 0.600 57.0 3:35 44.00 30 1600
Half load 4 0.480 42.0 2:45 44.00 29 1600
Quarter load 2 0.190 27.0 2:45 45.00 23 1600
1)
Maximum spin speed.
Power consumption in different modes
Off (W) Stand-by (W) Delay start (W)
0.50 0.50 4.00
Time to Off/Standby mode is 15 minutes maximum.
16.4 Common programmes
These values are indicative only.
Programme
kg kWh Litres h:mm % °C
rpm
1)
Bavlna
2)
95°C
8 2.75 100.0 3:30 44.00 85 1600
Bavlna
60°C
8 1.95 95.0 3:10 44.00 55 1600
Bavlna
3)
20°C
8 0.36 95.0 3:00 44.00 20 1600
Syntetika
40°C
3 0.60 60.0 2:10 35.00 40 1200
www.aeg.com38
To Next Page
Loading...
