EasyManuals Logo

AEG LTR8C6331A User Manual

AEG LTR8C6331A
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
3.2 The inlet hose
90
O
90
O
3/4”
3/4”
1/2”
3/4”
0.3-10 bar
FI
DK
SE
NO
Accessories delivered with the appliance may
vary depending on the model.
Make sure there is no damage to
hoses and there are no leaks from the
couplings. Do not use an extension
hose if the inlet hose is too short.
Contact the service centre for a
replacement inlet hose.
3.3 Water drainage
min.600 mm
max.1000 mm
The drain hose should stay at a height of no less than 600 mm and not more than 1000 mm.
You can extend the drain hose to maximum 4000 mm. Contact the authorised service centre for the
other drain hose and the extension.
3.4 Water-stop device
The inlet hose has a water stop device. This
device prevents water leaks in the hose
because of its natural ageing.
The red sector in the window «A» shows this
fault.
8 ENGLISH

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEG LTR8C6331A and is the answer not in the manual?

AEG LTR8C6331A Specifications

General IconGeneral
BrandAEG
ModelLTR8C6331A
CategoryWasher
LanguageEnglish

Related product manuals