Need help?Do you have a question about the AEG OKO-LAVAMAT 74620 update and is the answer not in the manual?
Your safety is paramount. Read warnings before installing or using the appliance.
Appliance must be connected to cold water supply. Observe installation instructions.
Only use for normal domestic washing. Do not alter specifications or modify product.
Dispose of packaging materials correctly. Materials are environmentally friendly.
When disposing, cut off mains cable, destroy plug, disable door catch, use authorised site.
Identifies external components of the washing machine, including control panel and door.
Details the compartments for pre-wash, main wash, stain remover, and fabric conditioner.
Guidelines for sorting laundry by care symbols, preparing items, and loading the machine correctly.
Recommends specific detergent types for whites, colours, and delicate items for best wash results.
Discusses the choice between powder and liquid detergents and how to use fabric conditioners.
Explains how load size, soiling, and water hardness affect the amount of detergent needed.
Advises on using water softening agents in hard water areas to reduce detergent usage.
Outlines the basic steps for operating the washing machine, from setting the program to removing the laundry.
Tables outlining washing programs, care symbols, max load, selector temperature, and possible options.
Details programs for separate fabric softening or starching, including load and selector.
Details programs for separate rinsing, including load and selector.
Details programs for separate spinning, including load and selector.
Instructions for cleaning the control panel and operating parts using a damp cloth.
Step-by-step guide on how to remove and clean the detergent dispenser drawer and its compartments.
Information on the drum material and how to remove rust stains using a special agent.
Advice to regularly check the rubber seal behind the door for deposits or foreign bodies.
Guide for identifying and resolving common malfunctions and error codes displayed by the machine.
Instructions on how to safely clean the drain pump, including removing foreign bodies.
How to set and check the additional rinse function for specific programs.
Steps to disable the previously set additional rinse function.
Instructions on how to disable the wash-water cooling function.
Explains how the guarantee applies when moving to another European country and lists contact details.
Essential safety advice for installing the appliance, covering weight, transport, and professional installation requirements.
Provides detailed dimensions of the washing machine from front, side, and rear views for installation planning.
Shows the rear view, highlighting the cold water connection requirement.
Notes that the appliance worktop must not be removed for height reduction under kitchen worktops.
Advice on moving the appliance safely, avoiding tipping and using transit packaging/bolts.
Detailed steps for removing transit bolts, bars, and packaging prior to installation.
Requirements for the installation site, including surface condition, heat sources, and accessibility.
Recommendations for installing on suspended floors to prevent vibration.
Instructions on how to level the appliance using adjustable feet for stability.
Guidance on connecting the appliance to the electricity supply, including fuse replacement and wiring colour codes.
Requirements for a permanent electrical connection, including a double pole switch and compliance with EU guidelines.
Information on connecting the appliance to the water supply, including safety devices and permanent plumbing.
Details the acceptable water pressure limits and actions for pressures outside the range.
Step-by-step instructions for connecting the inlet hose to the machine and water tap, ensuring watertight seals.
Instructions for connecting the drain hose to a standpipe or sink, including height requirements.
To Next Page
General