AEG Protect 2.33 2.0 - Page 50

50
Screen 2.4:
• Apparent output power L1 (display units 0.1 kVA)
• Apparent output power L2 (display units 0.1 kVA)
• Apparent output power L3 (display units0.1 kVA)
• Active output power L1 (display units 0.1 kW)
• Active output power L2 (display units 0.1 kW)
• Active output power L3 (display units 0.1 kW)
• Total apparent and active powers (display units 0.1 kVA and 0.1 kW)
• Output power factor of each phase (display units 0.01)
• Output load of three phases (display units 0.1 %)
• Total input load and total output load (display units 0.1 %)
• Calculated bridging time under the current load conditions
(display unit intervals 1 minute)