11
4 Set-Up and Operation
Installing the UPS is as easy as following the steps shown.
4.1 Inspection
Remove the UPS from its packaging and inspect it for
damage that may have occurred during shipping. If any
damage is discovered, repack the unit and return it to the
place of purchase.
4.2 Placement
Install the UPS unit in any protected environment that
provides adequate airflow around the unit which is free from
excessive dust, corrosive fumes and conductive
contaminants.
Do not operate your UPS in an environment where the
ambient temperature or humidity is high. Also, place the UPS
at least 20 cm away from the monitor to avoid interference.
To Next Page
Loading...
