AEG protect d. 3000 - Display and Menu Navigation

42
7.3 Display (Main Menu)
Press “ESC” to access the main menu.
Main menu for the LCD display
The following figures show the display in English (to change the
language see Chapter 7.3.6 on pg. 49ff. “Settings”).
7.3.1 UPS status - display
You can access the status screen by pressing “▲” or “▼” in the
main menu to go to “UPS Status” (the line is then highlighted)
and then press “ENTER” (automatic display after 5 min.).
The UPS status display is divided into several different sections
to retrieve the following information:
 Display that summarizes all load segment-relevant input and
output parameters, including the information on operation
status, the current load and the currently available battery
capacity
 Messages and alarms (also see Chapter 9.1.1 on pg. 59ff.)
 Battery display with status window and state of charge
Part 1 of the UPS status display
I n p u t O u t p u t
1 8 m i n
E ve nt lo g
UP S S t at us
Me a su re m en t s
Co n tr o l
Id e nt i fi ca t io n
Me n u
UPS status
UPS load
Autonomy time
Battery capacity
S et ti n gs