18
3.1 Unpacking and Inspection
It is recommended to move the equipment to the installation site by using
a pallet jack or a truck before unpacking. The system may be installed only
by qualified electricians in accordance with applicable safety regulations.
The cabinet is heavy, please install it with at least two peoples.
If any equipment has been damaged during shipment, keep the shipping
cartons and packing materials for the carrier or place of purchase and file a
claim for shipping damage. If you discover damage after acceptance, file a
claim for concealed damage.
Unpacking the unit in a low-temperature environment may cause
condensation occurred in and on the cabinet. Do not install the unit until
the inside and outside of the unit are absolutely dry (hazard of electric
shock). Remove the packing materials and lift the unit out with two people
at least.
UPS unit:
Battery cabinet:
To Next Page
Loading...
