AEG SANTO C 7 18 41 I - Instructions for Building-in; Integrating Appliance into Kitchen Unit

21
A
D023
Push appliance into the housing
until stop strip (A) touches the
kitchen unit.
D
C
D723
Open the door and push the appliance
against the side of the kitchen unit op-
posite to that of appliance hinges.
Fasten the appliance with 4 screws
provided in the kit included with the
appliance. Snap ventilation grille (C)
and hinge cover (D) into position.
Instructions for building-in
D765
Apply joint the sealing strip as shown
in figure.