AerialBox t2100 - Time Settings; Recorder Settings

30
Settings
Time Settings
Time Region allows the T2100 STB to
retrieve the time from various sources,
by default this is set to the Freeview
broadcast to ensure the EPG is always
correct however you can alter this
yourself.
You can also change the Region / State
you are living in so that if there is any
time zone change or channel changes
on the Freeview network the T2100
will be able to handle these changes
automatically.
Recorder Settings
If you are using the USB drive to record
content, you can control the options to
enable to a successful recording.
• Rec start time offset
Set the time before the scheduled
show to record, this is handy if the
show starts its broadcast earlier
than usual.
• Rec end time offset
Set the time to end the recording
after the scheduled show,
sometimes in the event of live TV
events, some shows may go over
time.
• Timeshift Duration
Set the max duration when
timeshitng shows, this allows you to
Pause and Rewind live TV.
Restrictions
Timeshitng may take a few
seconds to arrange recording.
Recording takes priority over
time shifts, if the tuner is needed
for a recording the time shift will
be saved at that point into the
library so you can still get the
previously time shifted content.