AerialBox t2100 - Connecting up; Connecting to Your Tv

9
Connect the cable from your aerial
to the CABLE IN socket in the back
of your receiver.
Connecting to your TV
Connecting using a HDMI Cable
Connect one end of the HDMI
cable into the HDMI socket on
the back of the receiver, then
connect the other end to the
HDMI input sockets on your HD
Ready TV.
Connecting using an AV Cable
If your TV doesn’t have HD
compatibility, you can connect
the receiver using the supplied AV
Cable, using the Red, White and
Yellow sockets on both your TV
and receiver.
Please note if you are using an AV
connection then it is not possible
to view programs in High Denition.
HD Ready TV
Connect your supplied AV
Cable into the correct Red,
White and Yellow sockets.
Connecting Up
Connecting to the Aerial