Need help?Do you have a question about the aero-naut Triple Neo Series and is the answer not in the manual?
Details on CAMcarbon folding props for electric model aeroplanes, highlighting design and benefits.
Recommendations for construction: aero-pick pins and balsa-ply building boards.
Overview of building sections and essential tips/notes for precise construction.
Lists recommended electric power, RC parts, glues, and technical specifications.
Cutting the nose, installing the motor mount, prop adapter, and spinner.
Gluing the servo tray, former, brass tube, and battery tray into fuselage.
Positioning fuselage tube and attaching canopy and cover.
Sheeting the tail unit, adding reinforcements, and constructing fin and rudder.
Gluing tailplane support, skid, fin, and tailplane to fuselage.
Gluing control horns and installing bowden cables for tail surfaces.
Preparing building jig and positioning main spar for speed wing.
Positioning ribs, fitting sheeting, and attaching root rib with dihedral brace.
Gluing spars, aileron components, and preparing trailing edge.
Assembling wing tips and cutting/attaching the aileron.
Preparing building jig and positioning main spar for R.E.S. wing.
Positioning ribs, fitting sheeting, and attaching root rib with dihedral brace.
Assembling wing tips and shaping leading edge of R.E.S. wing.
Preparing building jig and positioning main spar for thermic wing.
Positioning ribs, fitting sheeting, and attaching root rib with dihedral brace.
Assembling wing tips and shaping leading edge of thermic wing.
Preparing building jig and positioning main spar for centre section.
Positioning ribs, fitting sheeting, and attaching dihedral braces and wing joiners.
Gluing spoiler control horns and joining centre section wing panels.
Mounting servos, connecting controls, installing radio and battery.
Adjusting control throws, balancing model, and installing optional tow hook.
Details on CG, incidence, dihedral, and control throws for optimal flight.
To Next Page
General
