Do you have a question about the AEROPRAKT AEROPRAKT-32 and is the answer not in the manual?
Details airspeed limitations and markings on the indicator.
Outlines the limit load factors for maneuvers at gross weight.
Lists acceptable maneuvers within operational limits.
Checklist for engine fire during the start sequence.
Procedures for engine failure during takeoff roll and immediately after.
Procedures for engine power loss during climb and in level flight.
Outlines the steps for attempting to restart the engine in flight.
Describes the procedure for an emergency landing without engine power.
Details a precautionary landing with the engine running.
Provides steps to take in case of fire during flight.
Outlines procedures for low oil pressure situations.
Details procedures for high oil pressure situations.
Provides procedures for recovering from an inadvertent spin.
Covers procedures for loss of critical flight instruments.
Details procedures for loss of primary flight control systems.
Details the comprehensive preflight inspection checklist.
Details the step-by-step procedure for starting the engine.
Outlines the pre-takeoff checks and procedures.
Details the standard procedure for taking off.
Describes the procedure for takeoff from short or soft fields.
Describes the procedures for approaching the landing site.
Details the standard procedure for landing.
Describes the procedure for landing on short or soft fields.
Outlines the procedure for a go-around or balked landing.
Provides weighing data and CG location for the aircraft.
Records actual empty weight and CG position after assembly or modifications.
Covers low speed flight, stall recognition, and recovery.
Covers training for short field operations with obstacles.
Details training for takeoff and landing in crosswind conditions.
Covers training scenarios for imitated engine failures.