4
EN
IMPORTANT
Retain for future reference: read carefully
ProtectorProtector
Top part cover -
for inclined position
Top part cover -
for at position
Convertable foam -
inclined position
Convertable foam
- at position
Bottom part cover - for inclined and at positionBottom part cover - for inclined and at position
INCLINED POSITIONFLAT POSITION
Overview parts
• The mattress will quickly take on its original shape if you unroll
it as soon as you receive it. Remove the cover and let the foam
rest for up to 72 hours without placing any weight on it.
• Use the zipper clip from this manual to zip open the mattress
cover.
• Place the mattres with the colored side facing down.
• Use the mattress protector with the honeycomb structure
facing the baby.
• Make sure the mattress protector covers the complete surface
of the mattress.
• Only the combination of the perforated AeroSleep
®
tted
sheet and the AeroSleep
®
mattress protector provides the
optimal ‘safe sleep’ experience.
• When using the inclined position, place the baby near the end
of the mattress.
Instructions for use
To Next Page
Loading...