6
• The gap between the mattress and the sides of the cot may not exceed 3 cm in length and width. Mattress size is mentioned at the
inside of the mattress cover.
• Do not use the mattress if any part is broken, torn or missing and use only spare parts approved by the manufacturer.
• Be aware of the risk of open re and other sources of strong heat, such as electric bar res, etc. in the near vicinity of the cot.
• For the mattress protector, shrinkage up to 3% after domestic washing is normal.
• When the mattress is used in inclined position, place the baby with his feet near the end of the mattress.
• For safety reasons: only combine this mattress pack with an ‘AeroSleep SafeSleep Bed Bumper’.
• Remove the paperclip after use, keep out of reach of babies and children younger than 3 years.
More info: www.aerosleep.com
Designed and manufactured by QLEVR - Waterkeringstraat 21 - ZUID IV, 9320 Erembodegem, BELGIUM
Meets the requirements of EN 16 890
Warnings
To Next Page
Loading...