AETNAGROUP ROBOPAC ROBOTAPE 50 ME - LH User Manual

ENG
Cardboard box taping machine
Translation of the original instructions
Instructions manual code: 3709302249.0
English Edition: 1116
Serial number
|__|__|__|__|__|__|__|__|__|__|
____________________________________________________________________________________________________
Important
Read and understand these instructions before usin
g
the machine.
Kee
p
this handbook for further consultation.
ROBOPAC S.p.A.

AETNAGROUP ROBOPAC ROBOTAPE 50 ME - LH Specifications

General

Brand	AETNAGROUP
Model	ROBOPAC ROBOTAPE 50 ME - LH
Category	Tape Deck
Language	English

Summary

1. General Information

1.1. Purpose of the Manual

Explains the manual's objective to provide operator instructions and prevent risks.

1.2. Manufacturer and Machine Identification

Details the information on the machine's identification plate.

1.3. Terms and Definitions

Defines recurring terms used in the manual for clarity.

1.4. Modes of Requesting for Assistance

Provides contact information and procedures for technical support.

2. Safety Information

2.1. General Safety Precautions

Lists essential safety rules for operating the machine.

2.2. Safety Warnings for Handling and Installation

Covers safety precautions during machine handling and setup.

2.3. Safety Warnings for Use and Operation

Details safety rules for daily machine operation.

2.4. Safety Warnings Related to Incorrect Use

Describes predictable ways the machine might be misused.

2.5. Safety Warnings on Residual Risks

Highlights risks that remain even after safety measures are applied.

2.6. Safety Warnings for Regulations and Maintenance

Covers safety during maintenance and compliance with regulations.

2.8. Surrounding Areas

Illustrates perimeter work areas and safety zones around the machine.

3. Technical Information

3.1. Machine General Description

Provides an overview of the semi-automatic taping machine and its main parts.

3.2. Description of the Operation Cycle

Details the step-by-step process of how the machine operates.

3.3. Safety Device Descriptions

Explains the function of safety features like emergency stop and main switch.

3.6. Technical Specifications

Presents dimensional data and technical characteristics of the machine.

3.7. Noise Level

Reports noise levels measured according to ISO standards.

4. Information on Handling and Installation Operations

4.1. Recommendations for Handling and Loading

Provides guidance on safe procedures for handling and loading the machine.

4.2. Packaging and Unpacking

Describes how the machine is packed and how to unpack it safely.

4.3. Transport and Handling

Details methods and precautions for transporting the machine.

4.4. Machine Installation

Outlines the step-by-step process for installing the machine.

4.5. Mounting the Tape

Explains the procedure for installing adhesive tape on the taping unit.

4.7. Electrical Connection

Guides users through the electrical connection process.

5. Information on Adjustments

5.2. Conveyor Belt Adjustment

Details how to adjust the conveyor belts for proper tension and alignment.

5.3. Adjust the Transport Unit Driving Chain

Explains how to tension the driving chain for the transport unit.

5.4.2. Tape Position Adjustment

Details how to center the tape on the box.

5.4.3. Adjustment of Tape Pressure on the Casing

Explains how to adjust the spring tension for tape pressure.

6. About the Use

6.1. Recommendations for Operation and Use

General advice for operating the machine safely and correctly.

6.2. Control Description

Identifies and describes the main controls of the machine.

6.4. Emergency Stop and Restart

Explains how to use the emergency stop and restart the machine.

6.8. Positioning of Side Pressure Units

Details how to position the side pressure units for different box widths.

6.9. Height Setting of Work Table

Explains how to adjust the height of the work table.

7. Maintenance Information

7.1. Maintenance Instructions

General guidelines for performing maintenance operations safely.

7.2. Maintenance Period Table

Lists routine maintenance tasks, frequency, and procedures.

7.3. Lubrication Point Diagram

Shows lubrication points and recommended frequencies.

Lubricants Table

8. Troubleshooting

8.1. Troubles - Causes - Remedies

A table listing common problems, their causes, and solutions.

8.2. Correcting Taping Errors

Addresses specific errors related to tape application.

9. Spare Parts Replacement Information

9.1. Recommendations for Replacing Parts

General advice and safety precautions for replacing parts.

9.2. Replacement of Conveyor Belt

Step-by-step guide for replacing the conveyor belt.

9.3. How to Replace the Transport Unit Driving Chain

Details the process of replacing the transport unit driving chain.

9.5. Replacing the Blade

Step-by-step instructions for replacing the cutting blade.

9.7. Machine Disposal and Scraping

Provides guidance on safely disposing of the machine and its parts.

10. Enclosed Documentation

10.1. Warranty Conditions

Outlines the terms and conditions of the machine's warranty.