To Next PageTo Next Page
Need help?Do you have a question about the AETNAGROUP ROBOPAC TECHNOPLAT CS/CW and is the answer not in the manual?
General| Brand | AETNAGROUP |
|---|---|
| Model | ROBOPAC TECHNOPLAT CS/CW |
| Category | Stretch Wrapping Systems |
| Language | English |
Explains the manual's aim to provide operator instructions for use and risk prevention.
Mentions the identification plate on the machine for references and safety indications.
Provides contact information and details for requesting technical support or spare parts.
General advice on reading instructions, understanding warnings, and operator responsibility.
Precautions for safe handling, loading, unloading, and installation of the machine.
Guidelines for safe operation, including operator training, using safety devices, and workplace conditions.
Addresses risks associated with improper use and employer obligations.
Identifies residual risks like collision, slipping, limb cutting, and body crushing.
Specifies ambient conditions for electrical system operation, including temperature and interference.
Explains the meaning and location of various safety and information signs on the machine.
Describes the semi-automatic stretch film wrapping machine and its primary function.
Differentiates between Technoplat CS, CS TP, CW, and CW TP machine models.
Details the step-by-step process of the machine's wrapping operation cycle.
Describes the function and location of various safety devices integrated into the machine.
Lists key technical specifications including supply voltage, power, and absorption.
Outlines essential precautions for safe handling and loading of the machine.
Instructions for safely moving and lifting the machine using appropriate equipment.
General guidelines for installing the machine, emphasizing authorized personnel.
Essential steps for safely connecting the machine to the power supply.
Procedure for adjusting the film tension and stretch properties.
Step-by-step guide for adjusting the lifting chain of the reel carriage.
General recommendations for safe and effective operation of the machine.
Displays current wrapping parameters and provides access to other machine functions.
Controls for manual operation of machine components like trolley, table, and presser arm.
Interface for activating, programming, and managing machine recipes.
Controls for selecting and programming different types of wrapping cycles.
Step-by-step guide on how to create and program new recipes for the machine.
Procedure for correctly powering the machine on and off.
Detailed instructions on how to initiate and halt the wrapping cycle.
Procedure for activating the emergency stop and safely restarting the machine.
Step-by-step guide for correctly loading the film reel onto the machine's carriage.
General guidelines and safety precautions for performing machine maintenance.
Table detailing scheduled maintenance tasks and their recommended frequencies.
Diagram illustrating lubrication points and recommended intervention frequency.
Table listing the specific lubricants recommended by the manufacturer.
Procedure for safely draining condensate from the machine's pneumatic system.
Instructions for cleaning and maintaining the machine's air filter.
A comprehensive list of alarm messages, their causes, and recommended solutions.
Guidelines and safety precautions for replacing worn or damaged machine parts.
Step-by-step instructions for replacing the rotating table wheels on CS/CW models.
Step-by-step instructions for replacing the rotating table wheels on CS/CW TP models.
Procedure for replacing the cutting thread component of the machine.
Lists essential spare parts recommended for regular stock and quick replacement.
Details the warranty terms, coverage, and exclusions for the machine.
Provides the standard pneumatic circuit diagram for troubleshooting and maintenance.
