Your system’s lters work synergistically to provide the cleanest water straight from your faucet.
Filter Prep & Replacement
Every lter set — both new and replacement — be primed before rst use to perform properly. Prim-
ing is the process of preparing the lters by forcing running water through the system. This simple step
pushes air out of the lters, loosens up the ltration media, and ensures the system’s ready for water to
ow through so contaminants are captured and eliminated.
To maintain peak performance, lter changes are recommended at every 2000 gallons ltered*.
If you are not tracking gallons, follow the guidelines below for replacing your lters:
7
Refer to the ‘section on page 11 of this guide for detailed priming instructions.
*Filter life can be impacted by water quality.
Purchase replacement lters and for subscription service at
ClearlyFiltered.com/SinkFilters.
Keep your system performing its best by regularly replacing the lters. Enroll in our lter subscription
service to ensure you always have replacements ready and you never forget to reorder. Filters are mailed
straight to your doorstep at no additional cost and you’re rewarded with a discount on every set.
Subscribing is the simplest, quickest, and most cost-eective way to guarantee you have clean water
year-round and to make the most of your Clearly Filtered experience.
*Go to ClearlyFiltered.com/Subscription for more information.
• on every lter.
• (USA).
• Pick your
•
• .
8
To Next Page
Loading...