Assembly Instructions
Affordable Wheelchair Lift
Model KCSPM3648
(757) 524-3420
Version 3.0.0
1. Introduction
Congratulations on your purchase of a new wheelchair lift! We sincerely hope that
this lift will help you accomplish the things that are important to you and
those you love.
Note: If you are like me, then you hate reading instructions almost as much as you
hate having to doing things over because you did it wrong. Unfortunately,
this product can be assembled backwards, and doing so cannot be
remedied without taking it all apart and starting over. These instructions
are specifically written to prevent those mistakes. So, please refer to these
instructions with each step, and have a pleasant assembly.
Note: The photos in this guide display lifts in various stages of installation. It is
often the case that some recommended safety feature is not yet in place in a
specific photo. In particular, the Toe Shear Guard and a basic stair handrail
are missing in some of the scenarios we photographed.
Note: There are some minor design changes between different lifts pictured here.
These photos might not exactly match your particular lift.
Note: Even if your lift was shipped disassembled, some portions of it may have
been pre assembled for you.
Note: If your lift was shipped with some bolts and fasteners already in place and
you find it necessary to temporarily remove them, they must be removed
and then re-inserted in the same direction. Inserting the bolt the opposite
direction may cause problems.
Note: Throughout this document this is used as a caution symbol:
Photos of a typical indoor and a typical outdoor installation:
To Next Page
Need help?
General
