GROUNDING INSTRUCTIONS
If your elliptical has power incline with a 3-prong plug, you must follow these grounding instructions.
This product must be grounded. If a elliptical should malfunction or breakdown, grounding provides a path of least resistance
for electrical current to reduce the risk of electrical shock. This product is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with local codes and ordinances.
DANGER
ImPr0Per c0nnection Of the equipment_gr0unding Conduct °r Can result in a ris k of e!ectric sh0ckl check Wit h a qualified
electricia n Or serviceman if you ar e in doubt as to whether the product is Properly grounded. Donot modify the plug provided .......
with the product. If it wi!l not fit the outlet, have a proper outlet installed by a qualified electrician,
This product is for use on a nominal 110-120 Volt circuit and has a grounding plug that looks like the plug in the illustration. Make
sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this
product.
This product must be used on a dedicated circuit. To determine if you are on a dedicated circuit, shut off the power to that circuit
and observe if any other devices lose power. If so, move devices to a different circuit. Note: There are usually multiple outlets on one
circuit. This elliptical should be used with a minimum 15-amp circuit.
3-POLE
GROUNDED
OUTLET
_dDING PIN
WARNING
ConneCt this exercise pi0duct tO a prOPerly grounded Outlet 0nlyl
Never 0Perate Pr0duct with a damaged €0id or p!ug even if it is W0rking
properly. Never 0Perate any PrOduct if it appears damaged, or has been
immersed in waterl Contact customer Tech SupPOrt for replacement Or repair,
To Next Page
Loading...
