Afinia L801 - Operating Instructions Manual

Included
Rewinder
Base plate
Power supply
Power Cord
Thumb
Operating Instructions
Assembly instructions
1.
2.
3.
4.
5.
Included
:
Rewinder
Base plate
Power supply
Power Cord
Thumb
nuts
Operating Instructions
Assembly instructions
1.
Install base plate

Lift front of printer and slide base plate into place, aligning front feet of
Standoffs on base plate need to be facing upwards.
2.
Place rewinder on top of base plate, aligning standoffs with
3.
Line up the sides of the base plate with the sides of the rewinder base
4.
Install thumb
5.
Plug in power adapter to the rewinder and to the AC outlet.
L801 Rewinder
Operating Instructions
Assembly instructions
Install base plate
Lift front of printer and slide base plate into place, aligning front feet of
Standoffs on base plate need to be facing upwards.
Place rewinder on top of base plate, aligning standoffs with
Line up the sides of the base plate with the sides of the rewinder base
Install thumb
nuts.
Plug in power adapter to the rewinder and to the AC outlet.
L801 Rewinder
Lift front of printer and slide base plate into place, aligning front feet of
Standoffs on base plate need to be facing upwards.
Place rewinder on top of base plate, aligning standoffs with
Line up the sides of the base plate with the sides of the rewinder base
Plug in power adapter to the rewinder and to the AC outlet.
L801 Rewinder
Operating Instructions
Lift front of printer and slide base plate into place, aligning front feet of
Standoffs on base plate need to be facing upwards.
Place rewinder on top of base plate, aligning standoffs with
Line up the sides of the base plate with the sides of the rewinder base
Plug in power adapter to the rewinder and to the AC outlet.
Operating Instructions
Lift front of printer and slide base plate into place, aligning front feet of
Standoffs on base plate need to be facing upwards.
Place rewinder on top of base plate, aligning standoffs with
the slots
Line up the sides of the base plate with the sides of the rewinder base
Plug in power adapter to the rewinder and to the AC outlet.
Operating Instructions
Lift front of printer and slide base plate into place, aligning front feet of
the slots
in rewinder base plate
Line up the sides of the base plate with the sides of the rewinder base
plate.
Operating Instructions
Lift front of printer and slide base plate into place, aligning front feet of
printer with holes in base plate.
in rewinder base plate
plate.
printer with holes in base plate.
in rewinder base plate
printer with holes in base plate.